Idler Sets
description | units | detail | order | |
---|---|---|---|---|
Idler Frame Design | none | Idler mounting frame design. | 2 | |
Url | none | url | 15 | |
Image | none | Image | 18 | |
Idler Set Mass | Kg | The total mass of this idler set. | 17 | |
Frame Mass | Kg | Idler Set Frame Mass | 13 | |
Idler Type | none | The application specific to this idler frame design. | 1 | |
Rotating Mass | Kg | Total rotating mass of the idler set. | 14 | |
Wing Roll Angle | Degree | 7 | ||
Idler Gauge Length | mm | 19 | ||
Length of Flat | mm | 20 | ||
Idler Roll Material | Idler Roll Material | 21 | ||
Number of Rolls(per base) | none | 3 | ||
Belt Width | mm | Conveyor Belt Width | 4 | |
Shaft Series | mm | Idler shaft series. | 5 | |
Nominal Wall Thickness | mm | Nominal Wall Thickness | 22 | |
Designation | none | Bearing Reference Number | 26 | |
Pu | kN | equivalent static bearing load | 31 | |
Shell Mass | Kg | Idler Shell Mass | 33 | |
b - Circlip | mm | Beam dimension - Circlip | 37 | |
B - Bearing width | mm | Bearing width | 24 | |
Limiting speed | r/min | Limiting speed | 27 | |
Rotating Mass | Kg | Combined mass of the shell and bearing housings. | 35 | |
D - Outer race diameter | mm | Outer race diameter. | 23 | |
Reference speed | r/min | Reference speed | 28 | |
C | kN | basic dynamic load rating | 29 | |
C0 | kN | basic static load rating | 30 | |
Bearing Housing Mass | Kg | Combined mass of 2 off bearing housings. | 34 | |
t - Circlip | mm | Thickness of the circlip | 38 | |
Seal Thickness | mm | Seal Thickness | 25 | |
D - Circlip | mm | Diameter of the circlip | 36 | |
% Bearing Width | % | Seal width as a percentage of the bearing width | 40 | |
E | mm | Standard Dimension placeholder | 12 | |
C | mm | Standard Dimension placeholder | 10 | |
A | mm | Distance between fixing centres. | 32 | |
Shell Weld | mm | Size of shell weld fillet | 41 | |
Idler Seal Design | none | Preferred idler seal design. | 39 | |
D | mm | Standard Dimension placeholder | 11 | |
Idler Roll Length | mm | Idler Roll Length | 9 | |
G - Idler roll corner overlap | G - Idler roll corner overlap | 42 | ||
Idler Roll Diameter | mm | Idler Roll Diameter | 6 | |
Roll Mass | Kg | The mass of 1 roll. Rotating Mass (Kg) | 16 |
A platform developed to streamline conveyor system design, procurement, and maintenance in mining operations. Beta 1.0.0
Built with the Fraternate user framework
If you are interested in collaborating on an activity or project, we welcome you to reach out to us.